Description

The Intex Replacement Filter Cartridges are made from 100% polyester filter media and feature sharp pleat folds which maximize spacing between pleats. Tough urethane end caps assure durability for the life of the cartridge and a rigid PVC core allows maximum flow with minimum pressure loss. The Intex Type A, Model 59900 Filter Cartridge fits the Intex Wet Set, Easy Set, Frame Set, and Sun and Sand Pools and the Intex Krystal Klear Filter pump units. 10" Tall x 5.75" Diameter. Fits Intex filter and pump unit models 56611, 56631, & 58621 Fits Krystral Klear pump models 51, 51R, 520 and 520R. Can be used as replacement for Aqua Leisure Size 2 cartridge This "A" filter is sometimes called a type "C" filter with other brands and is interchangeable. In addition, it fits many Aqua Leisure and Best Way above ground pools such as the Simple Set and Quick Set Series.

The Intex Type B Model 59905 filter cartridge fits Intex model 56633 and 56631 filter pumps and fits Krystal Klear filter pump models 51, 520, 520R and 633. Also fits the Intex combination filter pump and chlorine generator systems.

For pumps with Gallons per hour (GPH) of 500, 530, 800, 1000 and 1500. Back to Top

Benefits

Superior filtration for extended equipment life

Filters out ultra fine dirt particles

Filter elements remove easily for cleaning

All corrosion proof elements

Back to Top

Features

100% polyester filter media

Sharp pleat folds

Excellent filtration efficiency and cartridge dirt holding capacity

Thermally bonded end caps for long life and durability

Back to Top

More Info

Cartridge Care and Cleaning

1. Remove the cartridge from the filter housing following the manufactures instructions.

2. Use a garden hose with a straight flow nozzle to wash down the filter element. Work from the top down, holding the nozzle at a 45-degree angle, and wash all the pleats with emphasis between the pleats.

3. Rinse until all dirt and debris is gone.

4. If the filter has a coating of algae, calcium carbonate, iron, or other minerals, soak the cartridge in a solution of one muriatic acid to twenty parts water until all bubbling stops. Warning: Use rubber gloves and safety glasses when using acid and chlorine. Do not add water to acid. Do not mix acid and chlorine.

5. Rinse the cartridge clean and reassemble housing. Back to Top