Description

Hayward Star-Clear Replacement Filter Cartridges provide crystal clear water and have extra cleaning capacity to accommodate pools and spas of all types and sizes. For replacement or new pool installations, Hayward sets the standard of excellence and value. The extra-large, single element cartridge with molded center core incorporates a unique "waffle-pattern design" which allows for maximum flow and provides extra strength using the special reinforced gasket molded end caps for maximum efficiency and easier cleaning. Star-Clear Replacement Filter Cartridges provide superior water clarity with minimal care. Star-Clear cartridge filters are available in 25 and 50 square foot (2.3 and 4.7 square meters) models to accommodate pools and spas of all types and sizes.

46115 - MFG. # CX250RE HAY
FILTER, CARTRIDGE 25 SQ.FT. GENERIC, 7" DIA, 9-13/16" LONG, UNICEL

46190 - MFG. # CX900RE HAY
CARTRIDGE, 100 SQ FT.,8-15/16" DIA, 19-1/4" LONG

46191 - MFG. # CX1200RE HAY
CARTRIDGE ELEMENT (C1200), 8-15/16" DIA, 23-3/8" LONG, OEM

46193 - MFG. # CX1750REGEN HAY
CARTRIDGE, C1750/PXC150, 8-15/16" DIA, 28-3/16" LONG

46194 - MFG. # CX1900RE HAY
REPLACEMENT CARTRIDGE ELEMENT, 9" DIA, 28-1/2" LONG, OEM Back to Top

Benefits

Superior filtration for extended equipment life

Filters out ultra fine dirt particles

Filter elements remove easily for cleaning

All corrosion proof elements

Back to Top

Features

Extra-large, single element cartridges

Unique waffle-pattern for extra strength

Excellent filtration efficiency and cartridge dirt holding capacity

Gasket molded end caps for maximum efficiency

Back to Top

More Info

Cartridge Care and Cleaning

1. Remove the cartridge from the filter housing following the manufactures instructions.

2. Use a garden hose with a straight flow nozzle to wash down the filter element. Work from the top down, holding the nozzle at a 45-degree angle, and wash all the pleats with emphasis between the pleats.

3. Rinse until all dirt and debris is gone.

4. If the filter has a coating of algae, calcium carbonate, iron, or other minerals, soak the cartridge in a solution of one muriatic acid to twenty parts water until all bubbling stops. Warning: Use rubber gloves and safety glasses when using acid and chlorine. Do not add water to acid. Do not mix acid and chlorine.

5. Rinse the cartridge clean and reassemble housing. Back to Top