Description
SDX Retro is a high flow suction outlet cover suitable for use as a wall fitting and also as a floor drain when debris removal is not a concern. ASME A112.19.8 - 2007 Listed and Virginia Graeme Baker Pool and Spa Safety Act compliant.
Back to TopBenefits
Virginia Graeme Baker Pool and Spa Safety Act compliant.
SDX Retro protects against all five types of entrapment; hair, limb, body suction, evisceration, and mechanical entrapment.
Back to TopFeatures
- Patented “ribbed” design achieves high flow with sixty “mini” drains
- Suction doesn’t transfer if one area is covered
- Dome shape to prevent a seal by a swimmer
- Anti-vortex shield blocks contact with direct suction
- Meets National anti-entrapments requirements
- ASME A112.19.8 – 2007 Listed
- IAPMO tested and certified; a nationally recognized testing laboratory (NRTL) accredited by ANSI.
- USPC (uniform swimming pool, spa and hot tub code) compliant
- IRC (International Residential Code), section 106.2 – suction fittings – compliant
More Info
With a flow rating of 200 gpm on the floor and 192 gpm on the wall SDX is compatible with pumps up to 3 hp. In most cases this eliminates the need to calculate the system total dynamic head.
SDX Retro fits existing plaster rings up to 10” in diameter.
SDX Retro is available for concrete and vinyl pools in eight colors to complement any interior surface.
Back to TopCan't Find What You Are Looking For?
If you cannot find a specific product or have any questions about our online ordering don't hesitate to call us at 1-800-LESLIES or click here to contact us via email.
Vac Alert
The Hayward Stratum VRS
Stingl Switch
