About the SmartPool SunHeater
LPM Part #:
A SunHeater IG Solar Heating System will raise the temperature of your pool water 10° - 15° F. The heating panels are 4-feet by 20-feet (two 2 x 20 panels) and made of high quality polypropylene which is lightweight, durable and are easy to install. The water simply flows through the SunHeater's many tubes via your existing pool pump where it is heated through the solar collectors before it returns to the pool, then the system circulates the warm water whenever your pump is running.
The system can be installed on the roof of your house, shed or cabana, mounted to a rack (optional mounting kit sku # 50575), or simply placed on the ground. This heating system can achieve the same results for your pool as a gas heater, but without the dangerous gas lines or the huge fuel bills. All it takes are a few warm sunny days. In fact, the SunHeater costs virtually nothing to operate, extends your swimming season by weeks, and you will have more enjoyment from your pool than ever before. The collectors should get full sun for at least 6 hours, the longer the collectors are in the sun, the better they will work.
In-ground pool requirements:
15' x 30' = 2 systems, 1 installation kit
16' x 36' = 3 systems, 1 installation kit
20' x 40' = 4 systems, 1 installation kit
SunHeater Systems Installation Kit (#SKU 50575) is required for all in-ground pool solar installations of up to four systems.
SmartPool SunHeater Specifications
|| Solar Heating
|Solar Heating System
|| Solar System Kit
|| In Ground