Description

The Hayward Pro Series Sand Filters are the very latest in pool filter technology producing sparkling, clear water with minimal effort. The weather proof tank is molded of durable, corrosion-proof, color-fast polymeric material and topped with the versatile 7-position Hayward Vari-Flo control valve, with the easy-to-use lever-action handle, you can dial any of the 7-valve/filter functions for easy operation with full size internal piping for a free-flowing performance. The integral top diffuser, self-cleaning under drain and 360-degree slotted laterals ensure even water distribution over every square inch of sand with thorough backwashing and a totally balanced flow. The Pro Series Sand Filters offer the ideal combination of energy efficiency and durability. Available in four filter system sizes to allow you to choose the ideal unit for your specific needs.

*30” & 36” filters do not come with backwash valve. Back to Top

Benefits

Dependable, all-weather performance with only minimal care

Efficient, self-cleaning 360-degree slotted laterals

Thorough backwashing with a totally balanced flow

Even distribution of water over the top of the sand media bed

Easy draining of tank, without loss of sand

Manual air relief purges any trapped air during operation

Integral sight glass lets you see when backwash cycle is completed

Back to Top

Features

Flange clamp design allows 360-degree rotation of valve

Precision-engineered, self-cleaning laterals

Integral top diffuser assures even distribution of water

Full-size internal piping for smooth, free-flowing performance

Corrosion-proof filter tank all weather performance

7-position Hayward Vari-Flo control valve with easy-to-use lever-action handle

Large pressure sand/water drain for rapid winterizing or servicing

Multi-port valve, sight glass, pressure gauge

Back to Top

More Info

Sand is the oldest and most popular method of filtration. Sand filters share two things in common:

1. When in the filtration mode, water always flows from top to bottom

2. They all have some sort of lateral or under drain with slots to hold back sand while allowing clean filtered water to pass through.

High-rate sand filters use a special filter sand, normally .45 to .55 mm (also known as pool grade #20 silica sand), because it has sharp edges that separate particles, allowing filtration to take place. They operate on the basis of "depth" filtration where dirt is driven through the sand bed and trapped in the spaces between the sand particles. A clean sand bed removes larger particles, and as the bed starts to load up with debris, the filter removes the finer particles. The sand can be cleaned by backwashing, which involves reversing water flow through the filter to the “waste” line. Sand filters trap debris as small as 20 to 40 microns.

A little-known fact is that a sand filter operates most efficiently during mid-cycle. Debris trapped in the sand bed actually help the filter work better so frequent backwashing reduces efficiency. Sand filters should only be backwashed when the filter has collected so much debris that it begins to restrict water flow and increase water pressure.

Applications:
In-ground pools of all types and sizes
In-ground spas (residential or commercial)
Water features (fishponds, fountains, and water gardens)

Amount of sand needed (not included)
20" – 200 lbs.
24" – 300 lbs.
30" – 500 lbs.
36" – 700 lbs.
Back to Top

Installation

This product requires installation. Why not let our professionally trained technicians install it for you? Your satisfaction is guaranteed and you will have the peace of mind knowing that your purchase has been installed correctly.

Check our Store Locator to see if we offer this service in your area. Or call 1-800-LESLIES directly to schedule service. If you would rather install it yourself all products include manufacturer instructions. Back to Top